MDS 38 FS Pro - User Manual

Engine Operating
I n s t ru c t i o n s
Pro Series
™
MDS instruction manual 5x6.5 4/28/00 3:09 PM Page 1

Summary

Step 1. Assembly

Step 2. Break-In Procedures

Ringed Engine Break-In

Details the break-in process for ringed engines, emphasizing rich mixture for cooling.

ABC Engine Break-In

Step 2 A. Muffler Mounting

Step 2 B. Fuel Tank Placement

Step 2 C. Propeller Selection and Installation

Step 2 E. Starting the Engine

Presetting the High-Speed Needle Valve

Instructions on how to set the high-speed needle valve for initial starting.

Presetting the Low-Speed Needle Valve

Steps to set the low-speed needle valve for initial idle.

Step 3. Low-Speed Needle Settings

The Pinch Test

Describes the pinch test method for adjusting the low-speed needle setting.

Step 4. Engine Care

Fuel

Recommendations for using clean, fresh fuel and fuel filters.

After-Run Oil

Importance of using after-run oil to prevent corrosion from methanol.

Prop Selection

Glow Plug

Step 5. MDS Safety Instructions and Warnings

Step 6. Service and Warranty

MDS 38 FS Pro Specifications

General

Brand	MDS
Model	38 FS Pro
Category	Engine
Language	English