14
ENC2
Toggle switch
For set horsepower
Note: The horsepower
has been set before
leaving the factory ,
anyone can t
modify it except the
maintenance person.
Code
Capacity(Horsepower)
0
1
2
3
4
5
6
7
8
9
2200W(0.8HP)
14000W(5.0HP)
11200W(4.0HP)
9000W(3.2HP)
8000W(3.0HP)
7100W(2.5HP)
5600W(2.0HP)
4500W(1.5HP)
3600W(1.2HP)
2800W(1.0HP)
ENC1
TOGGLE SWITCH FOR SETTING ADDRESS
'0-F' show the address '0-F' respectively, that is, '0-15' indoor unit (together 16
units), and the others follow the analogy. If two addresses are the same in
one system , the abnormal operation will occur.
To Next Page