Me Sleek - User Manual

Questions and Answers

C
Christopher StaffordAug 13, 2025
What to do if the power button is blinking orange on Me Epilator?
- T
  timothyfloydAug 13, 2025
  If the power button on your Me Epilator is blinking orange, it means an error has been detected. Try resetting the system by turning it off and on again. If the problem continues, disconnect the power cord and wait for a few seconds until all lights are off. Then, reconnect the power cord and turn the system back on. If the error light is still on, move to a cooler area with a room temperature below 30ºC/86ºF and restart the system.
C
Charles GuerreroAug 17, 2025
Why are no flashes coming out of my Me Epilator?
- M
  Mia BurkeAug 17, 2025
  To ensure your Me Epilator flashes, make sure all three conditions are met: an energy level is selected, the activation button is pressed, and the RF silver skin contact bars are in contact with your skin.
S
stefaniegibsonAug 21, 2025
What to do if my skin is red after Me Sleek Epilator treatment?
- A
  Andrea PhillipsAug 21, 2025
  It's normal for skin to become red after using the Me Epilator, and this redness usually disappears within 24 hours. However, if the redness lasts longer than 24 hours after treatment, stop using the device and contact your doctor.
S
Sean CarterAug 25, 2025
What to do if activation button on the applicator is blinking on Me Sleek?
- E
  Erin SullivanAug 25, 2025
  If the activation button on the applicator of your Me Epilator is blinking, press the applicator activation button. The applicator fan will start blowing, indicating that the device is active.
L
Lisa HuntAug 28, 2025
How to fix Me Sleek Epilator when all energy setting indicators are blinking?
- R
  robert65Aug 28, 2025
  If all the energy setting indicators on your Me Epilator are blinking, select an energy level and activate the applicator. The applicator fan will start blowing, which means the device is active.
R
Richard MathewsSep 1, 2025
Is it normal to feel warmth when using Me Sleek?
- B
  barkersheenaSep 1, 2025
  It is normal to feel some warmth when you apply the light flashes with the Me Epilator. If the discomfort is severe or lasts for more than 24 hours after treatment, discontinue use and contact your doctor.
R
Richard MartinezSep 4, 2025
Why I barely see any hair reduction using Me Sleek?
- D
  Danielle JenningsSep 4, 2025
  To see hair reduction with the Me Epilator, make sure you follow the suggested protocol and use the suggested treatment duration time.
D
Deborah SmithSep 8, 2025
What to do if no lights are on Me Sleek Epilator?
- M
  Madison MartinSep 8, 2025
  If no lights are on your Me Epilator, it likely means the power cable is not connected. Connect the power cable to resolve this.