What to do if no energy light flashes from the treatment window of my Me Hair Removal System?
To ensure the Me Hair Removal System emits flashes, verify that the device is powered on, an energy level is selected, and the RF skin contact bars are fully touching the skin in the treatment area. Also, if the device has been idle for more than 3 minutes, press the power button to reactivate it.
How to fix Me Hair Removal System when no indicator lights are on?
If no indicator lights are on for your Me Hair Removal System, it could be due to the power supply not being properly connected or the device not being turned on. Ensure the DC plug of the power supply is securely plugged into both the device and the AC outlet. If properly connected, press the power button on the control panel to turn on the device.
Why are all 3 energy indicator lights steady blue on my Me Hair Removal System?
If all 3 energy indicator lights on your Me Hair Removal System are steadily blue, it could mean the device flashes are consumed, the cooling vents are covered, or the room temperature is too high. To resolve this, turn off the device, disconnect it from the power supply, and contact Customer Care if the flashes are consumed. Otherwise, allow the device to cool or move to a cooler room before attempting treatment again.
Why are all 3 energy indicator lights blinking blue on my Me Hair Removal System?
If all 3 energy indicator lights are blinking blue on your Me Hair Removal System, it means an energy level wasn't selected after turning on the device. Press the el?s button once to select the LOW energy level. To select MEDIUM or HIGH energy levels, use the el?s button until the indicator light displays the energy level you desire.
What to do if 3 energy indicators are blinking in a continuous cycle on my Me Hair Removal System?
If the 3 energy indicators are blinking in a continuous cycle on your Me Hair Removal System, it means that while the device was set to HIGH energy level, the el?s button was pressed to lower the energy level to LOW. Wait for the indicator lights to stop cycling and the LOW energy level indicator is a steady blue before treating the desired area.
What to do if my Me Chic Epilator is on but there is no energy light flashing?
If your Me Epilator is on but not emitting flashes, ensure that the device is turned on, an energy level is selected using the el?s button, and the RF skin contact bars are fully in contact with your skin in the treatment area. Also, if the device has been idle for more than 3 minutes, press the power button to reactivate it.
How to fix Me Chic when no indicator lights are on?
If no indicator lights are illuminated on your Me Epilator, first ensure that the DC plug of the power supply is securely connected to both the device and a functioning AC outlet. If the power supply is properly connected, try pressing the power button located on the control panel to turn on the device.
Why are all 3 energy indicator lights steady blue on my Me Epilator?
If all three energy indicator lights on your Me Epilator are steadily blue (not blinking), it could be due to several reasons. First, the device flashes might be consumed. In this case, turn off and disconnect the device from the power supply and contact our Customer Care Specialists for assistance. Second, the cooling vents might be covered, so let the device cool and then turn it back on. Third, the room temperature could be too high, so move to a cooler room.
What to do if all 3 energy indicator lights are blinking blue on my Me Epilator?
If all three energy indicator lights are blinking blue on your Me Epilator, it means that an energy level was not selected after turning on the device. To resolve this, press the el?s button once to select the LOW energy level. To select MEDIUM or HIGH energy levels, use the el?s button until the indicator light displays the energy level you desire.
What does it mean when 3 energy indicators are blinking in a continuous cycle on my Me Epilator?
If the 3 energy indicators on your Me Epilator are blinking in a continuous cycle, it means that when the device was set to HIGH energy level, the el?s button was pressed to lower the energy level to LOW. Wait for the indicator lights to stop cycling and the LOW energy level indicator is a steady blue. Then treat the desired area.
Describes the device's purpose for permanent hair reduction on the body and face for men and women.
Details the skin tones the device is intended for use on, including examples.
Explains the hair colors the device is clinically proven to be effective on.
Identifies and describes the control panel, cooling vents, treatment window, RF contact bars, and power port.
Lists specific medical conditions and situations where the device should not be used.
Covers warnings for pregnancy, tanning, sensitive areas, tattoos, and potential skin damage.
Details risks associated with photosensitivity, medical conditions, and medications.
Provides essential safety guidelines for operating, cleaning, and storing the device.
Step-by-step guide on connecting and preparing the device for initial use.
Instructions on preparing the skin, including hair removal and cleaning, before treatment.
Guide on turning on the device and selecting the appropriate energy level.
Instructions on how to apply the device to the skin and perform treatments on the body.
Specific instructions for preparing and treating facial areas below the cheek bone line.
Describes potential sensations during treatment and expected skin reactions.
Outlines the recommended treatment frequency and duration for optimal results.
Provides instructions on cleaning the device and proper storage to maintain its condition.
Guidance on how to properly dispose of the device according to local regulations.
Information on using the device internationally, including voltage compatibility and travel precautions.
Explains the meaning of various labels and symbols found on the device and packaging.
Defines symbols related to WEEE, operating instructions, equipment class, and safety markings.
Provides technical details of the device, including light spectrum, power, dimensions, and weight.
Lists the safety and EMC standards the device complies with.
Defines the optimal temperature, humidity, and altitude conditions for device storage and operation.
To Next Page
General
