7 [EN]
• Connect the duct to section B.
• After completing the assembly, fit and adjust sections A and C depending on the length you
require, using the window kit screws provided.
Plate A: 65cm
Plate B: 65cm
Plate C: 51cm
Total combined: 170cm
Please note the diagram is schematic drawing for reference only.
• Install the duct via the duct window adaptor into the hole in section B.
Step 4: Close the window to secure the window kit in place. It is recommended that the gap
between the window kit and the sides of the window are sealed for maximum efficiency.
Step 5: Attach the duct via the air exhaust on the portable air conditioner using the duct
machine adaptor.
To Next Page
Loading...
