To Next Page
M
Michele SchmittAug 14, 2025
What to do if my Meaco MeacoFan 1056P doesn't start?
- RreedpaulAug 14, 2025
If your Meaco Fan air circulator does not start, ensure it is not in standby mode. Press the power button again to turn it on.
What to do if my Meaco MeacoFan 1056P doesn't start?
If your Meaco Fan air circulator does not start, ensure it is not in standby mode. Press the power button again to turn it on.
Why is my Meaco MeacoFan 1056P making so much noise?
An increased noise level in your Meaco Fan may be due to several reasons: 1. Dirty fan blades: Clean the fan blades. 2. Loose fan blades or motor: Tighten the locking cap. 3. Faulty fan motor: Please contact Meaco.
Why does not the remote work for Meaco MeacoFan 1056P?
If the remote for your Meaco Fan is not working, try these steps: * Replace the battery. * Ensure you are within 3 meters of the fan and pointing the remote directly at the fan base.
Why does my Meaco Fan speed randomly change?
If your Meaco Fan's speed is randomly changing, it is likely in natural mode. To switch to a different mode, press the mode button.
Why is my Meaco Fan making a clicking noise?
If your Meaco Fan air circulator is making a clicking noise, it may need lubricating. Run the air circulator on the highest fan speed for 4 hours.
How to fix Meaco Fan when it does not oscillate?
If your Meaco Fan air circulator does not oscillate, the MPCB may need resetting. Unplug the air circulator from the mains for 40 minutes.
Why can I hear the motor on low speed on my Meaco Fan?
The motor sound on lower fan speeds is normal for your Meaco Fan and is not a fault.
What to do if Meaco MeacoFan 1056P Fan display shows '00' or '99'?
If the display on your Meaco Fan shows ‘00’ or ‘99’, there is a problem with the circuit. Please contact Meaco.
Do not use the air circulator in explosive, aggressive, solvent-rich, dusty, or commercial environments.
Emphasizes grounding, power cord integrity, and correct extension cord usage.
Details ECO mode temperature/speed mapping and manual fan speed adjustment.
Addresses issues like no oscillation, noise, not starting, and remote control problems.
General| Type | Pedestal Fan |
|---|---|
| Airflow | 1056 m³/hour |
| Speed Settings | 12 |
| Oscillation | Yes |
| Height Adjustment | Yes |
| Voltage | 220-240V |
| Frequency | 50Hz |
| Control | Remote Control |
| Power Consumption | 24W |
| Blade Size | 40 cm |
| Noise Level | 20 - 60 dB(A) |
