What to do if the Meaco MeacoFan 650 remote does not work?
If the Meaco Fan's remote isn't working, first replace the battery. If that doesn't solve the problem, make sure you're using the remote within 3 meters of the fan and pointing it directly at the fan base.
Why does my Meaco Fan not start up?
If your Meaco Fan doesn't start, it might be in standby mode. Press the power button again to turn it on.
Why is my Meaco MeacoFan 650 making a loud noise?
An increased noise level in your Meaco Fan may be due to several reasons. The fan blades could be dirty, so you should clean them. Alternatively, the fan blades or motor might be loose; in this case, tighten the locking cap. If neither of these solutions works, there may be a fault with the fan motor, and you should contact Meaco.
What does AI on the Meaco MeacoFan 650 Fan display mean?
If 'AI' appears on the display of your Meaco Fan, it means the fan is in ECO mode. To turn it off, simply press the ECO button.
How to fix a Meaco MeacoFan 650 that does not oscillate?
If your Meaco Fan isn't oscillating, the MPCB may need resetting. Unplug the fan from the mains for 40 minutes to reset it.
Specifies environments where the air circulator must not be operated due to safety risks.
Advises on potential risks to medical devices and magnetic media from unit magnets.
Provides instructions to keep children away from the unit during operation and when unattended.
Covers essential electrical safety aspects including grounding, power cords, and extension cords.
Warns against blocking air intakes and keeping electrical components dry.
Details how to turn the fan on/off and its standby mode with temperature display.
Lists detailed technical data including voltage, power consumption, airflow, and dimensions.
Covers display errors, start-up failures, and oscillation problems with solutions.
Outlines the two-year warranty, exclusions, and conditions for validity.
To Next Page
General
