Meade 2080 - The Basic Model 2120 Telescope: Standard Equipment

-6-
necessary for you to return your telescope to the Meade
factory for servicing, these materials will help to assure
that no shipping dam~ge will occur.)
Packed in the carrying case are the complete basic Model
20aO, consisting of the a" Schmidt-Cassegrain optical
tube assembly and fork mount. Accessories included as
standard equipment are normally also packed within the
carrying case.
The Model 20aO (or foreign Model 20aOF) includes the follow-
ing standard equipment:
a." Schmidt-Cassegrain optical tube
and Fork Mount with Motor Drive
2 Eyepieces (l~" O.D.): MA 9mm (222X)
MA 25mm (aOX)
Eyepiece-Holder (l~'.)
. Diagonal Prism (1\,") ~ ~
6 x 30mm viewfinder witti rac~~t .
.Dust Covers: One for rear-c~ pen1ng
~ ~ One for correcting plate
3-Knob sc~ for attach~ng Model 2080
T to Equator1al Wedge
Hex wrench set (3 pes.)
Carrying Case
Power Cord
THE BASIC MODEL 2120 TELESCOPE: STANDARD EQUIPMENT
The Model 2120 is packed for shipment in 2 cartons: Carton
No. 1 includes the complete 10'. Optical Tube Assembly with
fork arms attached; Carton No. 2 includes the Motor Drive
base (and 4 bolts for attachment of the Motor Drive base
to the fork arms), viewfinder, viewfindex bracket, accessories,
power cord, and hardware package, all packed within the
carrying case.
The Model 2120 (or foreign Model 2l20F) includes the following
standard equipment:
10" Schmidt-Cassegrain optical tube and Fork
Mount with Motor Drive
2 Eyepieces (l~" O.D.): MA 9mrn (27aX)
MA 2Smm (lOOX)
Eyepiece-Holder (l~n)
Diagonal pr ism (l~'.)
a x 50mm viewfinder with bracket
Dust Covers: One for rear-cell opening
One for correcting plate
3-Socket capscrews for attaching Model 2120
Telescope to the Equatorial Wedge