To Next PageTo Next Page
Need help?Do you have a question about the Mec 2632SE and is the answer not in the manual?
General| Brand | Mec |
|---|---|
| Model | 2632SE |
| Category | Scissor Lifts |
| Language | English |
Manual provides instructions for safe operation; operators must be trained.
Emphasizes reading the manual, performing inspections, and operator training.
Explains hazard symbols and fall protection requirements for operators.
Detailed technical data for the 1930SE, 2632SE, and 3346SE series.
Detailed technical data for the 4046SE and 4555SE series.
Risks associated with electrical conductors and required safe approach distances.
Prevention of tip-over through load limits, slope adherence, and stability.
Guidance on preventing falls, collisions, and other operational dangers.
Visual identification of major machine components and their locations.
Explanation of controls on the platform and ground control stations.
Steps to assess the work area for potential hazards before operation.
Steps for pre-start checks and testing all machine functions before use.
Guidance on emergency stop, lowering, outdoor/indoor mode, and platform overload.
Instructions for safe driving, steering, and operating on inclines.
Proper use of maintenance locks and folding guardrails for safety.
Procedures for safely shutting down and using the sheet material rack.
Guidelines and warnings for charging the machine's batteries safely.
Operator tasks, safety during maintenance, and reporting defects.
Details on pre-start, frequent, annual, and 30-day service requirements.
Recommended lubricants, fluids, and service intervals.
Template for documenting machine inspection findings and service history.
Visual guide and list of decals for the 1930SE model.
Location and description of the machine's serial plate data.
Visual guide and list of decals for the 2633SE and 3346SE models.
Visual guide and list of decals for the 4046SE and 4555SE models.
Steps to identify and fix common machine malfunctions.
Guidelines for safely loading, securing, and transporting the machine.
Procedures for brake release, winching, and lifting with forklifts.
Guidelines for lifting the machine with cranes and identifying the center of gravity.
Details on warranty period, what is covered, exclusions, and how to file a claim.
