Need help?Do you have a question about the Mec Micro 26 and is the answer not in the manual?
General| Drive Motor | 24V DC |
|---|---|
| Working Height | 8.5 m |
| Platform Height | 6.5 m |
| Overall Width | 0.8 m |
| Overall Length | 2.2 m |
| Platform Capacity | 200 kg |
| Power Source | Electric |
| Drive Speed (Stowed) | 2.5 mph |
| Drive Speed (Elevated) | 0.5 mph |
| Platform Width | 0.7 m |
| Max Travel Speed | 2.5 mph |
| Turning Radius | 1.5 m |
| Overall Height | 2.0 m |
| Ground Clearance | 0.1 m |
Provides essential instructions for safely operating the MEC Aerial Work Platform.
Highlights safety rules, warnings, and essential operating procedures for safe use.
Explains safety symbols, colors, signal words, and fall protection requirements.
Details technical specifications, dimensions, capacity, and performance data.
Warns about electrocution risks and minimum safe approach distances to electrical lines.
Covers hazards related to exceeding capacity, slopes, and improper operation.
Addresses hazards like falling from the platform, collision with objects, and misuse.
Details explosion, fire, damaged machine, bodily injury, and battery-related hazards.
Identifies key components and their locations on the aerial work platform.
Explains the function and operation of controls located on the platform.
Details the function and operation of controls located at the base of the machine.
Provides guidance on inspecting the work area for suitability and potential hazards.
Outlines procedures for testing various machine functions before operation.
Provides step-by-step guidance for operating the machine, including controls and safety.
Details safety precautions like using the maintenance lock and handling hydraulic fluid.
Provides instructions and safety precautions for charging the machine's batteries.
Details the operator's pre-start inspection checklist for safety and functionality.
Specifies lubrication items, specifications, and frequencies for routine and scheduled maintenance.
Illustrates the location of various safety and instructional decals on the machine.
Shows the location and explains the information found on the machine's serial plate.
Provides guidance for diagnosing and resolving issues when machine functions do not operate.
Covers responsibilities of truck drivers and safety precautions during loading/unloading.
Details procedures for driving or winching the machine onto or off a transport vehicle.
Provides instructions on how to properly secure the machine to a truck or trailer.
Details safe lifting procedures, including rigging and center of gravity determination.
Outlines the warranty coverage, terms, exclusions, and limitations for MEC equipment.
To Next Page
