Page 24 Micro 26 - Operator’s Manual
March 2019Section 8 - Maintenance
Battery Charging
ART_5026
Battery Charger
and Power to
Platform socket
The charger surface can get hot while
operating. Contact with the skin or surrounding
materials should be avoided.
To reduce the risk of an electric shock, connect
only to a properly grounded single-phase (3
wire) outlet.
Do not use an external charger or booster
battery.
Charge the battery in a well-ventilated area.
Use proper AC input voltage for charging as
indicated on the machine.
Use only MEC authorized batteries and
chargers.
IMPORTANT Be sure to disconnect the charger from the outlet before
attempting to operate the unit.
The charger will indicate the status of the charge cycle.
To Next Page
Loading...
