Mec 4046SE User Manual

Part # 94797
November 2022
This manual applies to AC machines ANSI A92.20-2020 & CSA B354.6-2019.
1930SE Serial Number Range 18100100 - Up
2632SE Serial Number Range 17500100 - Up
3346SE Serial Number Range 17600100 - Up
4046SE Serial Number Range 17700100 - Up
4555SE Serial Number Range 17800100 - Up
Operator’s Manual
SE
AC
Slab Series
ART_4908

Mec 4046SE Specifications

General

Brand	Mec
Model	4046SE
Category	Scissor Lifts
Language	English

Summary

Manual Introduction and Operator Responsibilities

Operator Safety and Training Requirements

Ensures operators are trained, qualified, and understand the manual before operation.

General Safety Guidelines and Hazards

Safety Alert Symbols and Fall Protection

Explains hazard symbols and requirements for personal fall protection equipment.

Electrocution Hazard Mitigation

Details risks of electrical contact and required safe approach distances.

Tip-over, Fall, and Collision Hazards

Guidelines to prevent tipping and mitigate fall/collision risks during operation.

Additional Safety Hazards

Machine Specifications

Model-Specific Technical Data

Presents key operational and dimensional data for different SEAC Slab models.

Workplace Inspection Procedures

Functions Testing and Operation

Pre-Start Inspection and Checks

Ground and Platform Control Tests

Step-by-step tests for ground and platform control operations.

Operating Procedures and Safety Features

Battery Charging Procedures

Maintenance and Inspection Requirements

Pre-Start and Frequent Inspection Checklists

Troubleshooting Common Issues

Addressing Non-Operational Functions

Transport and Lifting Procedures