EasyManua.ls Logo

Mec 4069RT - Inspection Procedures; Pre-Operation Inspection Guide

Mec 4069RT
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 10 69 Series - Operator’s Manual
February 2019Section 3 - Safety Rules and Hazards
Do not raise the platform unless all four outriggers are properly lowered, the footpads are in firm
contact with the ground and the machine is level.
Do not adjust the outriggers while the platform is raised.
Do not drive while the outriggers are lowered.
Battery Safety
Burn Hazard
Batteries contain acid. Always wear protective clothing and eye
wear when working with batteries.
Avoid spilling or contacting battery acid. Neutralize battery acid
spills with baking soda and water.
Explosion Hazard
Keep sparks, flames and lighted tobacco away from batteries.
Batteries emit explosive gas.
Electrocution/ Hazard
Avoid contact with electrical terminals.
Lockout after Each Use
Select a safe parking location - firm level surface, clear of obstruction and traffic.
Lower the platform.
Turn the key switch to the off position and remove the key to secure from unauthorized use.
Push in the red Emergency Stop buttons to “off” position.
Push in the main power switch to “off” position
1.
2.
3.
4.
5.

Other manuals for Mec 4069RT

Related product manuals