This machine has been designed and manufactured for being used by one operator
only, and is driven by means of the appropriate handlebars. Any other use is not
permitted.!
Before the machine is operating, read the Use and Maintenance manual
thoroughly, so that you are fully aware of all the operating controls and safety
aspects of the machine.
Before starting the engine , be sure that speeds selector is in position “F” and
the SAFETY DEVICES are well working and fitting. Without these cares the
operator might work in a danger situation.
DON’T SABOTAGE THE ENGINE STOP’ SAFETY DEVICE AND THE
DISENGAGEMENT DEVICE. THE MACHINE MIGHT BECOME
EXTREMELY DANGEROUS!
3) Do not under any circumstances transport people or objects on the machine.
4) Always ensure that the machine’s safety devices are correctly mounted and in perfect
working condition..
5) Before use, check that all the controls, in particular the clutch, the Motor stop and the brakes
(if fitted)are in good working order.
6) Any modification or spurious parts being fitted without the Manufacturer consent will nullify
the guarantee, and any possible resulting damage will not answered for.
7) This machine must not be used by children or inexperienced persons.
8) Before operating the machine, check that the area is clear and free of debris and that there are
no people within the working area (danger zone). The operator, will be held responsible for the
safety of third parties, if these are found within the working area of the machine. Do not use the
machine under these conditions.
9) Keep clear of cutting blades at all times while the machine is in operation. Pay particular
attention when reversing; keep hands and feet clear.
10) Use the machine only with the handles in the correct working position. This allows a safe
working distance between the operator and operating area.
11) Use only original accessories and spare parts to guarantee safety and correct operation of the
machine.
12) Stop engine before refuelling and remove ignition key (if fitted).
13) Handle the fuel with care to avoid spilling on the machine; clean any spillage immediately.
14) Never refuel in confined places, in vicinity of open flames or near the source of sparks. No
smoking!
15) Before starting the engine, check that all the controls are in the idle position.
16) Do not smoke when starting the engine!
17) Do not run the machine in a confined area as toxic exhaust gas can kill.
18) Plan your work before commencing.
19) Do not use the machine when you are tired.
- 2 -
5- SAFETY WARNINGS
To Next Page
Loading...