1. FOREWORD Pag. 0
2. IDENTIFICATION AND MARKING Pag. 0
3. CONDITIONS-USE Pag. 1
4. WARRANTY Pag. 1
5. SAFETY WARNINGS Pag. 2-3
6. NOISE AND VIBRATIONS Pag. 4
7. PACKAGE OPENING Pag. 4
8. WARNING SIGNS Pag. 4
9. TECHNICAL FEATURES Pag. 5
10. TECHNICAL DATA Pag. 5
11. DRIVING SIGNS Pag. 6
12. TILLER WORKING WIDHT Pag. 6
13 CAUTIONS BEFORE STARTING Pag. 7
14 MACHINE STARTING Pag. 8
15 ADJUSTMENTS Pag. 9
16 ENGINE SAFETY DEVICE Pag. 10
17 LUBRICANTS Pag. 10
18-18/1 TILLER SET Pag. 11
19 DECLARATION OF CONFORMITY Pag. 12
All right reserved
This manual cannot be either reproduced or released without the
manufacturer’s prior written consent.
PRINTED IN ITALY
This symbol is used to highlight an important safety information.
If this information is ignored, people are in danger either of
possible injures – even serious ones – or death.
IMPORTANT
This term highlights special precautions to be taken in order not
to damage the machine.
ENGINE
Use and maintenance instructions of the engine are
mentioned in the relevant manual, copy of which is always
supplied with every machine.
2 - IDENTIFICATION AND MARKING
The machine serial number is printed on the drive box.
IMPORTANT NOTE
Always mention the machine serial number when calling our technical service or when ordering spare parts.
MARKING
Marking example
The CE mark is on the engine support right side. .
- 0 -
To Next Page
Need help?
General