13 – CAUTIONS BEFORE STARTING
1. Checking the engine oil level, plug “L” pic. 1; few or no oil may seriously damage the engine itself.
2. Please read carefully the use and maintenance book of the engine producer.
3. Check the handlebar’s height using the lever “B” pic. 2
4. Check the switch : position ON: switched on, position OFF: switched off
5. Use the setscrew “A” pic. 4 for a good work of the lever “I” pic. 3.
6. Check the oil transmission levels by the plug “M” pic. 1 and “N” pic. 5.
ATTENTION: do the above with the engine always switched off.
IMPORTANT!
B
L
M
Pic.2
Pic. 1
Pic. 4
A
I
Pic. 3
N
Pic. 5
- 7 -
To Next Page
Loading...