53
TIP: Press any button when
they are all unlit for help. The
robot will also tell you about its
button functions.
1 Meccanoid will start speaking and do a systems check to verify connections.
2 If connections are correct, the robot will restart, and then introduce himself.
Note: If connections are not correct, the robot will let you know. Return to step 146 and review connections.
3 Meccanoid will ask you to test its voice commands. Listen for the directions.
Eye colour communicates mode
Servo Motor
Motors
PLAY
3.1 LET’S PLAY
Microphone
BLUE
No/Exit
RED
Record L.I.M.
YELLOW
Yes/Save
GREEN
L.I.M. Library
Speaker
YOU ARE NOW READY TO PLAY!
MeccaBrain
TM
To Next Page
Loading...
