Mechan PLA-600 - Section 6 System Specifications; Technical Specifciation; Treatment Handle; Host Device

DOC. MEUM-131205700. Version 01
Section 6
System Specifications
6.1 Technical Specifications
6.1.1 Treatment Handle:
Length -------------------------------------------------------------------------------------------------------------2.0m;
Cleanness way ----------------------------------------------------------------------------------- anhydrous ethanol;
6.1.2 Host Device:
Power Input ---------------------------------------------------------------------------------------------------- 700VA;
Voltage ------------------------------------------------------------------------198-242VAC 50Hz /110 VAC60Hz;
Frequency ---------------------------------------------------------------------------------------------- 50Hz or 60Hz;
Fuse Type ---------------------------------------------------------------------------------------------- F5A L250VAC;
6.1.3 Power Output
General Frequency ------------------------------------------------------------------------------------------ 100KHz;
Voltage Range ------------------------------------------------------------------------------------------------ 0-295V;
Highest Output Power -----------------------------------------------------------------------------------------380W;
Working temperature ---------------------------------------------------------------------------------------- 10-40℃;
6.1.4 Dimension of Host Device:
Largest Weight -------------------------------------------------------------------------------------------------- 10KG;
Height ----------------------------------------------------------------------------------------------------------- 19CM;
Width -------------------------------------------------------------------------------------------------------------39CM;
Length ------------------------------------------------------------------------------------------------------------45CM;
6.1.5 Footswitch:
Cable length ------------------------------------------------------------------------------------------------------ 4.5m;
Cleanness way ----------------------------------------------------------------------------------- anhydrous ethanol;
6.2 System Classifications and Security Statement.
6.2.1 System Classification:
As per the regulations of GB9706.1-2007, this unit is classified as below:
1. Class I Type BF as per shock proof classification
2. Class I device as per counter-shock protection type
3. Type BF as per counter-shock protection degree
4. As per water damage protection classification, the footswitch can meet the water-proof structure
requirement of Term 44.6 of GB9706.4-2009.
5. Operation model: continuous operation in intermittent loading.