Mechan PLA-600 - Section 7 Emc Tables

DOC. MEUM-131205700. Version 01
Section 7 EMC TABLE
Guidance and manufacturer´s declaration – electromagnetic emission –
for all EQUIPMENT AND SYSTEMS
1
Guidance and manufacturer´s declaration – electromagnetic emission
2
The model PLA-600 is intended for use in the electromagnetic environment specified below.
Thecustomer or the user of the model PLA-600 should assure that it is used in such an
environment.
3
Emissions test
Compliance
Electromagnetic environment – guidance
4
RF emissions CISPR
11
Group 1
The Model PLA-600 uses RF energy only for its
internal function. Therefore, its RF emissions are
very low and are not likely to cause any
interference in nearbyelectronic equipment.
5
RF emissions CISPR
11
Class B
The Model PLA-600 is suitable for use in all
establishments, including domestic
establishments and those directly connected to the
public low-voltage power supply network that
supplies buildings used for domestic purposes.
6
Harmonic emissions
IEC 61000-3-2
A
7
Voltage fluctuations
/
flicker emissions IEC
61000-3-3
Complied