Med-Fit EM6300A - Safety-Technical Controls

38
Telephone: 0800 121 4626 www.thetenscompany.co.uk
SAFETY-TECHNICAL CONTROLS
For safety reasons, review the following checklist before using your EM6300A Digital
TENS/EMS
1. Check the device for external damage.
- deformation of the housing.
- damaged or defective output sockets.
3. Check the usability of accessories.
- patient cable undamaged
- electrodes undamaged.
Please consult your distributor if there are any problems with device and accessories.
MALFUNCTIONS
Should any malfunctions occur while using the EM6300A Digital TENS/EMS, check
- check the cable is correctly connected to the device. The cables should be inserted
completely into the sockets.
CONFORMITY TO SAFETY STANDARDS
The EM6300A Digital TENS/EMS devices are in compliance with the following
standards:
EN 60601-1-2: 2007 Medical electrical equipment -
Part 1-2: General requirements for basic safety and essential performance
-Collateral standard: Electromagnetic compatibility
-Requirements and tests
EN 60601-1:2006 Medical electrical equipment
Part 1: General requirements for basic safety and essential performance