EX8000 User Manual
Revision 00
MAN-EX8000 REV00 EX8000 USER MANUAL Page 7 of 22
End Board Panels
End Board Options
Headboard and Footboard Finish Options
Custom Headboard and Footboards Available
Preparation for Use
Unpacking (If Shipped LTL/Commercial)
Tools Required:
Utility knife
Side-cutting shears
To unpack bed, footboard and headboard:
1. Use the utility knife to carefully cut the
shrink-wrap film and remove it from
the bed.
2. Use the side-cutting shears to carefully
cut all banding and tie straps.
3. Use the utility knife to carefully open
the carton containing the end boards,
and remove the headboard and
footboard.
4. With two persons, slowly slide bed off
the pallet.
To Next Page
Loading...
