Medela Freestyle Flex - Motor Unit and Tubing Care

18
Cleaning (cont.)
5.5 Cleaning the motor unit
Supplies needed:
• Drinking-quality water
• Mild dish soap
• Clean dish or paper towel
Parts needed:
• Motor unit
CAUTION
• Unplug the breast pump before cleaning the motor unit.
• Do not immerse the motor unit in water; do not run water over the
motor unit.
NOTICE
• Do not spray or pour liquid directly onto the pump.
• When cleaning the motor unit display, only use a damp, soft towel with mild dish soap. Other
cleaners or abrasive cloths may degrade the display performance.
1. Switch the breast pump off.
2. Unplug the breast pump from the power source.
3. Wipe the motor unit with a clean towel moistened with
drinking-quality water.
4. Wipe the motor unit dry with a clean, dry towel.