EasyManua.ls Logo

Medela Freestyle - Page 5

Medela Freestyle
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Questions? Visit www.medela.com or call us at 1-800-435-8316.
5
WARNING: To avoid health risk and reduce the risk of injury:
• Repairs must be performed only by an authorized service agency. Do not repair yourself! No
modifi cations to the device are permitted.
• Never use a damaged device. Replace damaged or worn parts.
• Use the Freestyle breastpump only for its intended use as described in this manual.
• Do not use the Freestyle breastpump while sleeping or overly drowsy.
• This is a single user product. Use by more than one person may present a health risk.
• Do not drive while pumping.
• Inspect all appropriate pump components before each use.
• Do NOT continue pumping for more than 2 consecutive pumping sessions if no results are
achieved.
• Do not thaw frozen breastmilk in a microwave or in a pan of boiling water.
• If tubing becomes moldy, discontinue use and replace tubing.
• Never use while pregnant, as pumping can induce labor.
• Clean and sanitize all parts that come into contact with your breast and breastmilk prior to fi rst use.
• Wash all parts that come into contact with your breast and breastmilk after every use.
CAUTION: Can lead to minor injury:
• Do not expose the motor unit to direct sunlight.
• Separation from power is only assured through the disconnection of the power adaptor
from the wall socket outlet.
• If you feel pain in your breast or nipple, turn the pump off or slide a fi nger between the fl ange and
your breast to immediately break the suction.
• Contact a healthcare professional or breastfeeding specialist if you experience
problems or pain.
• Portable and mobile radio frequency communications equipment can affect the Freestyle
breastpump.
• Use only the power adaptor that comes with the Freestyle breastpump or approved power
options on page 18.
• Make sure the voltage of the power adaptor is compatible with the power source.