medi one CMS50D - 9 Troubleshooting; Display and Reading Problems

English
44
9. Troubleshooting
Trouble Possible
Reason
Solution
The SpO2 and
Pulse Rate
can not be
displayed
normally
1. The nger
is not properly
positioned.
2. The
patient’s SpO
2
is too low to
be detected.
1. Place the
nger properly
and try again.
2. Try again;
Go to a
hospital for
a diagnosis if
you are sure
the device
works all right.
The SpO
2
and Pulse
Rate are not
displayed
stably
1. The nger
is not placed
inside deep
enough.
2. The nger
is shaking or
the patient is
moving.
1. Place the
nger properly
and try again.
2. Let the
patient keep
calm.