EasyManua.ls Logo

medi Soft OA - Care, Maintenance, and Disposal; Care Instructions; Storage Instructions; Material Composition

medi Soft OA
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
serious incidents are defined in Section
2, No. 65 of the Regulation (EU) 2017/745
(MDR). The traceability of this product is
assured via a UDI code
.
Care instructions
Hook and loop fasteners should be
closed for washing. Soap residues,
lotions and ointments can cause skin
irritation and material wear.
Wash the product by hand, preferably
using medi clean washing agent.
• Do not bleach.
• Leave to dry naturally.
• Do not iron.
• Do not dry clean.
    
Storage instructions
Keep the product in a dry place and do
not expose to direct sunlight.
Material composition
Polyamide, PU, polyester, lycra,
aluminum
Liability
The manufacturer’s liability will become
void if the product is not used as
intended. Please also refer to the
corresponding safety information and
instructions in this manual.
Disposal
The product can be disposed of in
the domestic waste.
Your medi team
Wishes you a speedy recovery!
In the event of any complaints regarding
the product such as damage to the fabric
or a fault in the fit, please report to your
specialist medical retailer directly. Only
serious incidents which could lead to a
significant deterioration in health or to
death are to be reported to the
manufacturer or the relevant authorities
in the EU member state. The criteria for
English
E015744_AAL_soft_OA.indd 7 27.10.20 08:55

Other manuals for medi Soft OA

Related product manuals