Mediastar Evolution 776 DVB-T LAN-Caster User Manual

Getting Started With MediaStar Evolution
776 DVB-T LAN-Caster
The MediaStar Evolution 776 LAN-Caster allows DVB-T
TV and Radio channels to be streamed onto an IP
network. Connect a DVB-T aerial signal into the LAN-
Caster and use the simple browser based control
interface to stream up to 11 channels from a single RF
multiplex on to the network.
A networked MediaStar digital media decoder display
unit can then decode these streams and output the
video and audio to an LCD or plasma display. The
MediaStar ‘Viewer’ software application can decode
the streams and provide live TV pictures and sound on
a PC.
What’s in the box
• 776 DVB-T unit
• External Mains/DC power supply with locking
DC output connector
• RS232 serial comms cable
• RJ45 patch cable
• USB comms cable and driver CD
• Self adhesive desktop feet kit
• Video source/IP address label
Quick Start Guide

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves or other apparatus (including
ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarised or
grounding-type plug. A polarised plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not t into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles
and the point where they exit from the apparatus.
11. Only use attachments or accessories specied by
manufacturer.
12. Use only with the cart, stand tripod, bracket, or
table specied by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
Mediastar Evolution
1
PART NO. 200-2370
776QSG_v2

Mediastar Evolution 776 DVB-T LAN-Caster Specifications

General

Brand	Mediastar Evolution
Model	776 DVB-T LAN-Caster
Category	TV Receiver
Language	English

Summary

Quick Start Guide

Getting Started With MediaStar Evolution 776 DVB-T LAN-Caster

Introduces the MediaStar Evolution 776 LAN-Caster and its function for streaming DVB-T TV and Radio channels over an IP network.

What's in the box

Lists the included accessories and components provided with the MediaStar Evolution 776 LAN-Caster unit.

Important Safety Instructions

Provides essential safety guidelines and precautions for the installation and use of the apparatus.

Installation

Details the proper installation procedures, including ventilation requirements and power connection for the LAN-Caster unit.

Connecting Terrestrial RF

Explains how to connect the terrestrial RF source to the LAN-Caster and discusses protection against atmospheric electrical discharge.

Selecting IP Address

Guides on selecting and configuring a suitable IP address for the LAN-Caster unit on the network.

Configuring With Serial Communications

Describes how to configure the LAN-Caster's IP address using a serial connection and terminal emulator.

Configuring With A Browser Application

Explains how to access and adjust operational parameters via a web browser interface using the unit's IP address.

Configuration Using USB Serial Communications

Details the use of a USB-based serial COM port for configuration when a physical serial port is unavailable.

Connecting To The Network

Instructs on connecting the LAN-Caster to the network using a CAT5 patch cable after IP configuration.

Lan-Caster Configuration Menus

Outlines the HTML-based configuration menus for adjusting operational parameters and accessing contextual help.

Specification

Provides details on the capabilities and optional features of the MediaStar Evolution LAN-Caster unit.

Status

Describes the various fields displayed on the Status page, indicating current device status and operational parameters.

Channel Setup

Explains how to select RF multiplexes and TV/radio channels for streaming on the network.

IP Configuration

Details network configuration options including DHCP, Static IP, Netmask, Gateway, and DNS Server settings.

Enablement Code

Explains how to enter enablement codes to upgrade the LAN-Caster with additional features.

Set Password

Describes how to set a password to protect unauthorized access to configuration pages and command interfaces.

Software Upgrade

Guides on upgrading the unit's software via a web server, including enabling hourly checks for new versions.

Locator LEDs

Details the functionality of Locator LEDs for quick unit identification within a rack by flashing panel LEDs.

Advanced Settings

Covers advanced network settings like Link Mode, Channel Raster Start Frequency, and Channel Bandwidth.

Technical Specifications

Lists the detailed technical specifications of the MediaStar Evolution 776 LAN-Caster unit.

Regulatory Requirement Notices

Outlines regulatory compliance information for Europe (CE) and the USA (FCC), including applied standards.

Correct Disposal Of This Product

Provides instructions on the proper disposal of the product at the end of its lifecycle to promote sustainable reuse.