Mediola AIO User Manual

© 2015 mediola – connected living AG, Irrtümer und Änderungen vorbehalten | Version 6/2015 1
AIO GATEWAY
Setup of AIO GATEWAY in combination with AIO CREATOR NEO & ConfigTool
1. Connect AIO GATEWAY to power and LAN
Note: Operate the product only with the supplied AC adapter.
Please connect the AIO GATEWAY to power first. Then you can connect the AIO GATEWAY with your local network.
2. Configure AIO GATEWAY
Download the AIO GATEWAY ConfigTool:
Gateway ConfigTool -
Download for Windows
Gateway ConfigTool - Download for Mac
Now install and start the ConfigTool. All detected AIO GATEWAYS will be listed. Te refresh the list use the „Refresh
gateway list“ button.
Now tap on AIO GATEWAY to open the details. The illustration shows the settings in the delivery state:
AIO GATEWAY backside

Mediola AIO Specifications

General

Brand	Mediola
Model	AIO
Category	Gateway
Language	English

Summary

Connect AIO GATEWAY to Power and LAN

Power and LAN Connection

Connect the AIO GATEWAY to a power source and local network for initial setup.

Configure AIO GATEWAY

Network Settings Configuration

Adapt IP settings, use suggest settings, or configure network parameters manually via the ConfigTool.

Firmware Update Procedure

Check for and install the latest firmware version for the AIO GATEWAY using the ConfigTool.

Factory Reset Options

Perform factory resets (simple, password, or full) using the device's reset button.

Activate AIO GATEWAY in AIO CREATOR NEO

Device Manager Integration

Integrate the AIO GATEWAY into AIO CREATOR NEO by adding it via the Device Manager.