Why does my Medion Vacuum Cleaner say 'Low Battery'?
If your Medion Vacuum Cleaner displays a 'Low Battery' message, it means the battery is too low. To resolve this, fully charge the wiper robot again.
What to do if my Medion MD 18999 Vacuum Cleaner says 'PLEASE CHECK DIRTY WATER TANK'?
If your Medion Vacuum Cleaner displays 'PLEASE CHECK DIRTY WATER TANK', it means the dirty water tank is full. Empty the dirty water tank to resolve this issue.
Why does my Medion Vacuum Cleaner say 'PLEASE CHECK CLEAN WATER TANK'?
If your Medion Vacuum Cleaner displays 'PLEASE CHECK CLEAN WATER TANK', it could be due to a few reasons. The clean water tank might be empty, the drain could be blocked, or the contacts in the clean water tank might be corroded. Try filling the tank with clean water, checking the discharge opening, or cleaning the water tank thoroughly with PH-neutral detergent.
How to fix 'PLEASE CHECK MAIN BRUSH' error on Medion Vacuum Cleaner?
If your Medion Vacuum Cleaner displays 'PLEASE CHECK MAIN BRUSH', it indicates that the cleaning roller is blocked. Inspect the cleaning roller and clean it if necessary.
Why is my Medion MD 18999 Vacuum Cleaner not sucking up water?
If your Medion Vacuum Cleaner doesn't suck up water while cleaning, check that the cleaning roller and wiper lip are properly installed. Also, verify if the air filter is blocked and clean it if needed.
What does 'PLEASE CHECK AND INSTALL WATER TANK' mean on my Medion MD 18999?
If your Medion Vacuum Cleaner displays 'PLEASE CHECK AND INSTALL WATER TANK', the water tank is either not in the appliance or hasn't been properly attached. Check to ensure the water tank is correctly attached.
How to resolve 'PLEASE CLEAN NOSE WHEEL' error on Medion MD 18999?
If your Medion Vacuum Cleaner displays 'PLEASE CLEAN NOSE WHEEL', it means the front drive wheel isn't running. Check the drive wheel and clean it if necessary.
What to do if Medion MD 18999 says 'PLEASE PUT THE ROBOT TO AN OPEN AREA'?
If your Medion Vacuum Cleaner displays 'PLEASE PUT THE ROBOT TO AN OPEN AREA', it means the wiper robot can't move or is stuck. Place the wiper robot back onto a free area.
What causes a charging fault in my Medion MD 18999 Vacuum Cleaner?
If you are experiencing a charging fault with your Medion Vacuum Cleaner, check the charging station and charging contacts. Clean them if necessary.
What does 'PLEASE CLEAN DROP SENSORS' mean on Medion MD 18999 Vacuum Cleaner?
If your Medion Vacuum Cleaner displays 'PLEASE CLEAN DROP SENSORS', it means the drop sensors are dirty. Clean the drop sensors to resolve this.
Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE symbols.
Defines the robot's purpose, indoor-only use, and IP protection ratings.
Outlines restrictions on use, industrial application, and modification policies.
Details risks to children and requirements for supervision during operation and maintenance.
Covers risks of electric shock, short circuits, and proper handling of power adapters and cables.
Addresses risks related to flammable materials, explosions, and improper water tank use.
Warns about damage from rough surfaces and risks associated with stairs and obstacles.
Explains dangers of swallowing batteries and contact with battery acid, including first aid.
Details hazards of incorrect battery replacement, heat exposure, and disposal.
Warns about suffocation risks from small parts and plastic wrap in packaging.
Guides the user on the initial charging process for optimal battery performance.
Emphasizes electrical safety precautions before performing any cleaning or maintenance.
Lists voice prompts, associated symbols, potential causes, and solutions for errors.
Covers additional common faults not related to voice outputs and their corresponding solutions.
General| Brand | Medion |
|---|---|
| Model | MD 18999 |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page
