Medionic IONIC-PULSER PRO User Manual

COLLOIDAL SILVER
GENERATOR
IONIC-PULSER
PRO / Standard S
Manual
since 1997
Dear customer,
You have purchased a proprietary device that has been developed in cooperation with professional
users. Already in 1997, Medionic GmbH was the first company in the German-speaking countries
that made colloidal silver known to the public. In the meantime, almost all book authors work with
our equipment and many silver solutions that are available in the mail-order business and in
pharmacies are produced with it. Studies of several independent laboratories confirm our
information about concentration and quality of the produced silver dispersions (model Standard S).
Ionic-Pulser is a protected trademark in Europe which is registered at the European Patent Office.
Attention: Similar designations do nothing have in common with our original equipment. These
devices are also operating on the principle of electrolysis but not on the Ionic Pulser ® system that
makes possible exact concentrations as shown in the table below.
Please note that with conductance measuring instruments (TDS Meter) - even if they are calibrated
in ppm - it is possible to determine real solutions such as salt solutions but not the concentration of
metal dispersions, e.g. colloidal silver. The stated values in our table were determined and
confirmed using complex laboratory measurement procedures.
IONIC-PULSER
®
- best results even with bi-distilled water - there are no additional
measuring instruments required! - The device is automatically set to different water
qualities and temperatures.

Medionic IONIC-PULSER PRO Specifications

General

Brand	Medionic
Model	IONIC-PULSER PRO
Category	Medical Equipment
Language	English

Summary

Manual

Preparation Process

Setup and Operation Steps

Steps for preparing the device and water for colloidal silver production, including electrode insertion and power connection.

Water Quality and Usage Notes

Guidance on water types, additives, and container choices for optimal colloidal silver production results.

Concentration Determination

Concentration Measurement and Factors

Explains ppm, how the Ionic-Pulser compensates for factors, and how production time determines concentration.

Operational Notes for Concentration

Instructions on heating, stirring, and appearance related to achieving desired silver concentrations.

Storage and Maintenance

Storage Recommendations

Advises on suitable containers, location, and temperature for storing colloidal silver solutions.

Equipment Maintenance

Details on cleaning the generator and care for the silver electrodes to ensure optimal performance.

Silver Electrode Care and Replacement

Instructions for cleaning, handling, and replacing silver electrodes for accurate concentration.

Troubleshooting and Safety

Repair Malfunctions

Common issues with the device, power supply, and solution appearance, with potential causes and solutions.

Safety Indications

Important safety precautions for operating the device, including pacemaker users and handling.

Disposal Guidelines

Instructions on how to dispose of the device in an environmentally responsible manner.

Customer Service and Warranty

Information on contacting customer service, repair procedures, and warranty terms.