Medison S3600 - Operation; Basic functions

Operation
17
A shortlist of various device models is now shown on the display.
− Select the fi tness tracker that you primarily use, in this case it is model S3600.
The app then starts to search for Bluetooth devices within range and displays a list of
the devices found.
− Select your fi tness tracker S3600 from the list of devices.
A rotating circle is now displayed on your fi tness tracker for 10 seconds.
− Within these 10 seconds, press and hold the touch fi eld for at least 2 seconds to
confi rm the connection between the devices.
Once the connection is successful, a green check mark
is shown on the fi tness
tracker display
1
.
If you do not confi rm the connection on the fi tness tracker within 10
seconds, you must repeat the connection process using the app.
Once the connection is successful,  will appear on your fi tness tracker and the
following text will be displayed in the app: THE DEVICE IS CONNECTED
AND READY TO USE.
− Tap FINISH to fi nish establishing the connection.
If the fi tness tracker is connected to a smartphone/tablet, the Bluetooth symbol
lights up white on the display
1
.
All measured data is synchronised with the MEDION® Fitness app automatically or
manually, if necessary.
If you would like further information or advice on using the MEDION®
Fitness app, please use the feedback function within the app. You can also
download the user manual for the MEDION® Fitness app from within the
app.
Operation
Basic functions
− When the display is switched off, tap the touch fi eld
2
to switch it on
(see Fig. E).
− Tap the touch fi eld to scroll through the menu items.
− Tap and hold the touch fi eld to open a submenu, confi rm your selection or switch
a function on/off.