35
Electromagnetic Compatibility
(EMC)
This equipment complies with the European rules for EMC according to
the safety standard IEC 60601-1-2. This device complies with EMC rules
under test conditions that include use of system cables and connectors
between system components.
This Equipment requires special precaution regarding the EMC and must
be installed and put into service according to the information provided in
this manual.
The use of accessories and cables other than those specied and sold by
the manufacturer may result in increased emissions or decreased immunity
of the equipment and may cause the system to be non-compliant with the
requirements of IEC 60601-1-2. Replace cables and connectors between
components only with BioFlex approved cables and connectors.
This system may cause radio interference or may disrupt the operation of
nearby equipment. It may be necessary to take mitigation measures, such
as reorienting or relocating the equipment or shielding the location.
To Next Page
Loading...