PAIRING NEW DEVICES
When removed from the charging case, the X20 will automatically enter Bluetooth pairing mode if a
previously paired device is not found. Select “MEE audio X20” in the Bluetooth menu of the new device
you wish to pair to complete the pairing process.
To manually enter pairing mode:
Remove right earpiece from case, press and hold the touch panel for 10 seconds to power it off,
release the touch panel, then press and hold it again for 5 seconds again until the blue and white lights
flash indicating pairing mode.
Select “MEE audio X20” in the Bluetooth menu of the new device you wish to pair to complete the
pairing process.
To Next Page
Loading...
