Need help?Do you have a question about the MEE connect AF-T1 and is the answer not in the manual?
Identifies physical buttons, ports, and status lights on the Connect transmitter.
Lists compatibility with 3.5mm, RCA, and TOSLINK audio outputs.
Explains support for aptX and aptX Low Latency for better audio quality.
Details connecting the transmitter via TOSLINK optical audio output.
Details connecting the transmitter via RCA audio outputs (red/white).
Details connecting the transmitter via a 3.5mm headphone jack.
Explains how to initiate and complete the pairing of the first headphone.
Guides on pairing a second headphone for simultaneous audio streaming.
Instructions for removing and pairing a new headphone in an existing slot.
Details how previously paired headphones automatically reconnect.
Instructions to set TV volume to maximum for optimal audio.
Guides on using headphone controls to adjust volume levels.
Explains the process of resetting the device to factory defaults.
Describes the status indicated by different LED light combinations.
Addresses problems with the device not turning on or charging.
Solutions for Bluetooth pairing failures and connection issues.
Covers issues like no audio, low volume, or delay in sound.
Addresses crackling, static, and interference during audio playback.
Outlines important safety guidelines for using the device.
Provides instructions on cleaning and maintaining the device.
Warns about potential hearing damage from prolonged high-volume use.
General| Driver Size | 40mm |
|---|---|
| Charging Time | 2 hours |
| Bluetooth Version | 5.0 |
| Connector Type | 3.5mm |
| Driver Type | Dynamic |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 32 Ohms |
| Cable Length | 1.2m |
| Foldable | Yes |
| Bluetooth Profiles | A2DP, AVRCP, HSP, HFP |
| Audio Codecs | SBC |
| Bluetooth Range | 10m |
To Next Page
