EasyManua.ls Logo

MEE MATRIX CINEMA - Page 8

Default Icon
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
This can be used to delete all previous Bluetooth pairings from memory. Before the Matrix Cinema ANC can be used
again, a new pairing will need to be created.
FACTORY RESET
This can be used to restore all of the features of the Matrix Cinema ANC to their factory settings.
HARD REBOOT
A hard reboot can be used on a headphone that has become unresponsive. This does not delete any pairings or
reset any settings.
SAFETY AND CARE
Clean with a soft cloth, damp with diluted soap water solution if necessary. Do not use chemical cleaners.
When not in use, power the headphones off and store them in the included protective carrying case.
Battery performance will be severely decreased when stored in extreme temperatures: below -10°C/14°F or
above 45°C/113°F including direct sunlight.
The lifetime of the battery will be significantly reduced if your headset is not charged for a long time. It is
recommended to charge your headset at least once a month.
There are no user-replaceable/reparable parts in the headset. Disassembling it will void your warranty.
If the device comes in contact with liquids, quickly wipe it away. If submerged in water, do not turn the device on
until completely dried. Note: liquid submersion voids the warranty.
Do not use around flammable gasses as fire or explosion may occur.
WARNING
Using headphones at high volumes for extended periods of time will result in permanent hearing damage. It is
advised you keep volume levels moderate to low at all times for your safety. Turn the volume all the way down after

Related product manuals