EN
46
SAFETY INSTRUCTIONS
• Carry out testing and inspection of vehicles only in a
safe working environment and in safe conditions.
• Never attempt to use or read the product while
manoeuvring the vehicle – risk of fatal or serious
personal injury.
• Wear safety glasses that comply with the
requirements of ANSI.
• Work outdoors or in a well ventilated area – risk of
personal and/or fatal injury from inhalation of
exhaust fumes.
• Apply the parking brake. If the vehicle has an
automatic gearbox put it in P (parking), if it has a
manual gearbox put it in neutral.
• Work outdoors or in a well ventilated area – risk of
personal and/or fatal injury from inhalation of
exhaust fumes.
• Pay attention to moving parts (fan, auxiliary drive
etc.) when the engine is running – risk of serious
personal injury.
• Internal combustion engines get very hot when they
are switched on – risk of burn injury.
• The engine and ignition must be switched o when
connecting or disconnecting the test equipment,
otherwise the test equipment or electronics in the
vehicle can be damaged. Switch o the ignition
before connecting the fault code reader to, or
disconnecting it from, the Data Link Connector (DLC).
To Next Page
Loading...