Meec tools 014145 - Measurement Unit Selection

EN
51
CONTRAST
1. Go to main menu, browse to Contrast with the
arrow buttons and press the ENTER button to
conrm.
– Main Menu
– Diagnostics
– Language
– Contrast
– Unit of Measure
FIG. 3
2. Use the arrow buttons to increase or decrease the
contrast in the Contrast menu.
FIG. 4
3. Press the ENTER button to save the setting and
return to previous menu.
MEASUREMENT UNIT
Go to main menu, browse to Unit of Measure with the
arrow buttons and press the ENTER button to conrm.
– Main Menu
– Diagnostics
– Language
– Contrast
– Unit of Measure
FIG. 5
4. Switch between SI units and imperial units with the
respective arrow.
– Unit of Measure