To Next PageTo Next Page
Need help?Do you have a question about the Meec tools 020735 and is the answer not in the manual?
General| Brand | Meec tools |
|---|---|
| Model | 020735 |
| Category | Saw |
| Language | English |
Keep work area clean, well-lit, and free from explosive substances. Maintain distance for onlookers.
Use matching plugs, avoid earthed surfaces, and protect from rain/moisture to prevent electric shock.
Stay alert, use common sense, and avoid using the tool when tired or under influence. Wear safety glasses.
Do not force the tool, use the correct tool, and ensure the switch functions. Pull plug before adjustments.
Tool must be serviced by qualified personnel. Keep tool clean and properly maintained.
Keep hands away from the chain. Use insulated grips. Wear safety glasses and ear protection.
Hold tool by insulated grips, never leave unattended, check tensioning arm, secure workpiece.
Limit usage, use low-power mode, and wear safety equipment to reduce exposure.
Read instructions, stay alert, and switch off immediately if product malfunctions.
Potential risks include vibration injuries, damage from defective parts, or ejected objects.
Metal bandsaw with base plate and integrated LED light for sawing metal profiles.
Lists and identifies key components of the bandsaw, such as tensioning arm and motor casing.
Instructions on how to attach the guide component before operating the bandsaw.
Steps for safely powering the bandsaw on and off, including speed adjustment.
Requirements for using the product outdoors, including RCD connection.
Allow moving parts to stop and never brake the accessory by pressing it.
Detailed steps for safely releasing, fitting, and tensioning a new saw blade.
