To Next PageTo Next PageWhat to do if my Meec tools Lawn Mower has error E6?
If your Meec tools Lawn Mower displays error E6, it means the rollover sensor has been triggered. Simply turn the mower upright, then press START and OK.
What does F1 mean on my Meec tools 027415 Lawn Mower?
If your Meec tools Lawn Mower displays F1, it means that rain delay is activated. No action is required.
General safety guidelines for operating the mower.
Instructions for users to familiarize themselves with the product.
Steps to take before operating the mower.
Guidelines for upkeep and storing the mower.
Covers handling, operation, and transport safety points.
Guidelines for protecting the mower from lightning.
Explains icons related to the mower's functions.
Explains icons related to the charging station.
Explains icons related to the battery.
Lists technical details like cutting area, battery capacity, etc.
Provides a general description of the robot lawn mower.
Covers placement, corners, passages, and slopes.
Steps to connect the charging station to a power outlet.
Verifying installation and performing initial operations.
Procedure for changing the mower's PIN code.
Configuring schedule and operation times.
Overview of regular maintenance requirements.
Instructions and safety for replacing mower blades.
How to clean the robot lawn mower safely.
Cause and correction for rain delay activation.
Cause and correction for mower outside cutting zone.
Cause and correction for no perimeter wire signal.
Cause and correction for blocked wheel motor.
Cause and correction for blocked rotor.
Cause and correction for obstruction sensor issue.
Cause and correction for mower lifted off ground.
Cause and correction for rollover sensor trigger.
Cause and correction for tilt sensor trigger.
Cause and correction for docking failure.
Cause and correction for battery temperature issues.
Cause and correction for unknown errors.
General| Brand | Meec tools |
|---|---|
| Model | 027415 |
| Category | Lawn Mower |
| Language | English |
