Dismantling
Take hold of the grass collector and lift it upwards.
CUTTING HEIGHT
Loosen the lever by pressing outwards. Adjust the cutting height by moving the lever forwards or backwards.
OPERATION
IMPORTANT! Read the engine manual and ll with petrol and oil before using the lawnmower.
Starting the engine
Start the engine as follows, after checking petrol and oil.
1. Stand behind the lawnmower, take hold of the brake lever and press it against the upper handle.
2. Take hold of the brake lever and quickly pull up the starter cord. Slowly release the starter cord after the engine has started. The engine
and blades stop when the brake lever is released.
3. Adjust the speed using the throttle tted on the handle.
To Next Page
Loading...
