MULTIPOINT
Multipoint allows two Bluetooth devices to be connected to the Runaway
simultaneously, providing additional flexibility for your multimedia experience.
1. MULTIPOINT PAIRING
To use two Bluetooth devices with the Runaway, first pair them by following
the pairing procedure described in the Pairing with Bluetooth Devices
section on Page 4 for each device and then turn off the headphone. Both
devices will need to be paired before multipoint can be used.
When turned on again, the Runaway will automatically attempt to connect to
the 2 most recently-paired devices, as long as they have Bluetooth enabled
and are within range. If a device that has already been paired does not
connect automatically, select “Air-Fi Runaway” from the Bluetooth menu of
the device.
If you no longer wish to connect to multiple devices, disable Bluetooth on
the device you do not want connected to the Runaway or remove the “Air-Fi
Runaway” pairing from the Bluetooth menu of the device.
(continues on page 10)
9
To Next Page
Loading...
