General Information
Warm Laminator(Optional Cutter) MF1700-M1 PRO, 1630mm/64” updated from classic
M1 & M1+, keep the advantages of silicon roller, pneumatic lift etc. With optional cutters,
not only save the cost and time but adjust all positions during lamination, will prevent
any printings or laminating mistakes.
Equipped with more stronger frame ensures more stable and easy to operate, that is this
model can achieve laminating and cutting in one machine with high performance. It has
been the most human and efficiency laminating machine ever. With a laminating and
mounting width up to 1630mm(64''), ensures most application possibilities.
Before first use of the MEFU laminator, you should
carefully read this manual, which contains
important instructions, indications and safety
information. Failure to read the manual may result
in serious injury to operators and damage to
machine.
Machine is heavy! Please be careful, when moving.
To Next Page
Loading...
