Mega H-330A - Table of Contents

TABLE OF CONTENTS
1. Introductory Illustrations
1.1 Principal parts ---------------------------------------------------------------------------- 1-1
2. Specifications
2.1 Specifications ----------------------------------------------------------------------------- 2-1
3. Installation
3.1 moving and lifting ---------------------------------------------------------------------- 3-1
3.2 Foundation layout and Set-up --------------------------------------------------------- 3-2
4. Operation
4.1 Control Panel ---------------------------------------------------------------------------- 4-1
4.2 Operating preparation ------------------------------------------------------------------ 4-3
4.3 Manual Operation ---------------------------------------------------------------------- 4-4
4.4 Automatic operation -------------------------------------------------------------------- 4-5
4.5 Special Operation ----------------------------------------------------------------------- 4-5
4.6 Break -In Operation -------------------------------------------------------------------- 4-5
Addition 1 Amplifying Valve (Optional) -------------------------------------------------4-6
5. Maintenance
5.1 Hydraulic Circuit ------------------------------------------------------------------------ 5-1
5.2 Oiling and Lubrication ------------------------------------------------------------------ 5-2
5.3 Others ------------------------------------------------------------------------------------- 5-3
6. Trouble Shooting Guide
6.1 Sawing Problems and Solution --------------------------------------------------------- 6-1
6.2 Minor Operating Troubles and Remedies --------------------------------------------- 6-2
6.3 Error information ------------------------------------------------------------------------ 6-3
7. Reference Charts
7.1 Standard cutting Chart ----------------------------------------------------------------- 7-1
7.2 Standard cutting Chart ----------------------------------------------------------------- 7-2
7.3 Standard cutting Chart ----------------------------------------------------------------- 7-3
Addition 2 Electrical Circuit -----------------------------------------------------------------