Mega H-330A User Manual

Automatic BANDSAWS
H-330A
FULL STROKE
INSTRUCTION MANUAL
MEGA MACHINE CO., LTD.
DOC NO
：
H330A-FULL-100.U
CTRL NO
：
06
UPDATE
：
2007/9/13
DOC VER
：
A1

Mega H-330A Specifications

General

Brand	Mega
Model	H-330A
Category	Saw
Language	English

Summary

2 SPECIFICATIONS

2.1 SPECIFICATIONS

Technical data including cutting capacity, blade size, motor output, and dimensions.

3. INSTALLATION

3.1 Moving and Lifting

3.2 Foundation layout and Set-up

Guidelines for preparing the foundation and setting up the machine for stability.

4. OPERATION

4.1 Control Panel

Explanation of the buttons, switches, and displays on the machine's control panel.

4.2 OPERATING PREPARATION

Saw Blade Preparation

Workpiece and Machine Setup

4.3 MANUAL OPERATION

Cutting Adjustments

4.4 AUTOMATIC OPERATION

4.5 SPECIAL OPERATION

4.6 BREAK-IN OPERATION

5. Maintenance

5.1 HYDRAULIC CIRCUIT

5.2 Oiling and Lubricant

6. TROUBLE SHOOTING GUIDE

6.1 Sawing Problems and Solution

Table listing typical sawing issues, their probable causes, and recommended solutions.

6.2 Minor Operating Troubles and Remedies

6.3 Error information

7.2 Standard Cutting Chart

7.3 Standard Cutting Chart