Need help?Do you have a question about the MEGAREVO R5KLNA and is the answer not in the manual?
Describes manual's purpose and product applicability.
Identifies intended audience for the manual.
Explains symbols used for safety and information.
Crucial safety guidelines for operating the inverter.
Overview of the inverter's capabilities and functions.
Illustrates the overall system connectivity.
Details various operating modes of the inverter.
Provides physical dimensions of the inverter.
Identifies and describes connection terminals.
Lists detailed technical specifications for different models.
Instructions for inspecting the unit upon arrival.
Lists items included in the package.
Guidelines for physically installing the inverter.
Details how to connect photovoltaic panels.
Instructions for connecting to the grid.
Explains connections for backup loads.
Instructions for connecting the battery.
Describes how to set up Wi-Fi connectivity.
Describes how to set up GPRS connectivity.
Details on installing Current Transformers (CTs).
Instructions for installing the emergency stop button.
Explains the physical control panel components.
Describes the meaning of LED indicators.
Details on using different operational modes.
Describes the various interfaces displayed on the LCD.
Describes system states and user settings.
Explains how to set or change the password.
General setup menu options.
General system settings.
Setting the inverter's working mode.
Enabling/disabling EPS function.
Settings for battery wake-up.
Configuring PV input modes.
Settings for anti-reverse functionality.
Enabling/disabling ARC detection.
Button enable/disable settings.
General battery settings.
Selecting battery type.
Parameters for lead-acid batteries.
Deep discharge settings.
Battery communication settings.
Selecting grid standards.
Specifics on setting grid standards.
Settings for grid parameters.
General run settings.
Settings for reactive power mode.
Setting grid power percentage.
Setting discharge power percentage.
Setting charge power percentage.
Setting PV power percentage.
Setting minimum grid voltage.
Setting maximum grid voltage.
Setting minimum grid frequency.
Setting maximum grid frequency.
Active reference settings.
Setting the 485 address.
Setting the 485 baud rate.
Language selection.
Backlight settings.
Date and time settings.
Clearing operation history.
Maintenance access.
Factory reset procedure.
Introduction to parallel operation.
Setting number of parallel units.
Configuring master/slave units.
Setting parallel address.
Battery sharing settings.
CT sharing settings.
Phase selection for three-phase.
Parallel charge current setting.
Parallel discharge current setting.
Enabling/disabling parallel function.
Generator operation settings overview.
Setting start SOC for generator.
Setting stop SOC for generator.
Setting charge current to battery from generator.
Setting max run time for generator.
Setting cooldown time for generator.
Generator control settings.
Setting generator power.
General inquiry menu.
Inverter module information.
Module serial number.
Firmware version.
Accessing running records.
Diagnostic information.
Inverter operation statistics.
Diagrams for generator connection.
Notes on generator operation.
Generator settings interface.
Generator control settings.
Diagram for parallel inverter setup.
Specific parallel diagram for split phase.
Parallel diagram for 120/208V three phase.
Parallel diagram for 230/400V three phase.
How to connect communication cables for parallel units.
Important notes for parallel operation.
Main parallel setting interface.
Error codes for parallel setup.
Overview of advanced modes.
Settings for advanced modes.
Main advanced mode settings.
Selecting advanced working modes.
Advanced control settings.
Time-of-use settings.
Table of common faults and solutions.
General| Model | R5KLNA |
|---|---|
| Category | Inverter |
| Output Power | 5 kW |
| Frequency | 50/60 Hz |
| Number of MPPTs | 2 |
| Cooling Method | Fan |
| Operating Temperature | -25°C to +60°C |
| Protection Level | IP65 |
To Next Page
