Need help?Do you have a question about the MEGAREVO REVO Series and is the answer not in the manual?
Defines the manual's scope, target group, and explains used symbols.
Crucial guidelines for safe operation and installation of the inverter.
Recommends surge arresters for protecting the PV system.
Covers anti-islanding features and PE connection/leakage current requirements.
Specific safety precautions for handling and replacing batteries.
Explains symbols found on the inverter and its type label.
Outlines compliance with European low voltage and EMC directives.
Describes basic features, system versions (E/I), and presents a system wiring diagram.
Details multiple operating modes of the inverter based on PV, grid, and battery availability.
Provides the physical dimensions of the inverter in millimeters.
Details the function and labels of various input/output terminals on the inverter.
Lists technical specifications for PV input voltage, current, and battery parameters.
Details AC output/input power, backup output, efficiency, and general inverter data.
Outlines inverter features like topology, interface, communication, and safety/EMC compliance.
Instructions to check for damage and lists included accessories in the package.
Details environmental and site conditions required for safe inverter mounting.
Provides step-by-step instructions and spatial clearance needed for inverter installation.
Explains how to connect PV modules to the inverter, including voltage limits.
Details the process and recommendations for connecting the inverter to the AC grid.
Explains the EPS connection, differentiating between I and E versions and auto/manual modes.
Discusses EPS load rating, overload warnings, and provides examples of feasible loads.
Details the process for connecting high-voltage lithium batteries and BMS communication.
Explains CT connection for power monitoring and export control.
Describes the DRM connection for demand response modes, noting it's temporarily retained.
Details how to connect the inverter to a network via Wi-Fi for monitoring.
Explains the GPRS interface for load control via a smart plug.
Guides through the steps for starting the inverter and checking its status.
Explains the components of the inverter's control panel, including the LCD and buttons.
Details the meaning of different LED indicator states for various operational modes.
Outlines system settings, including work modes, EPS, battery, and grid standards.
Describes the LCD interface, system settings, and how to interpret error codes.
Explains the display information for PV inputs, DC bus voltage, and battery status.
Shows display information for battery current, grid connection, inverter, and load parameters.
Details display information for grid power, load power, PV power, temperature, and system state.
Guides on setting the inverter's operational state and changing the password.
Provides an overview of system settings, including work modes and EPS enable.
Details settings for EPS, battery wake-up, remote control, start delay, and PV input modes.
Explains how to configure battery settings, type, and parameters like charge voltage.
Covers battery communication types and selection of grid standards for different regions.
Guides on configuring run settings like React Mode, Grid Power, and Discharge Power.
Details settings for react power, grid power, discharge power, PV power, and grid voltage limits.
Covers settings for grid frequency limits and active reference types.
Explains settings for RS485 address, baud rate, and language selection.
Covers settings for backlight, date/time, clearing history, and password management.
Details maintenance functions and factory reset procedures for the inverter.
Displays information about the inverter model.
Shows module serial number, firmware versions, running records, and diagnosis.
Provides an overview of available statistics like time, peak power, and energy generation.
Lists common fault codes, their explanations, and initial troubleshooting solutions.
Continues listing fault codes, explanations, and solutions for inverter issues.
Continues listing fault codes, explanations, and solutions for inverter issues.
To Next Page
General
