Need help?Do you have a question about the MEGAREVO R8KH3 and is the answer not in the manual?
Provides critical safety warnings, including high voltages and hot surfaces.
Provides specific safety guidelines for handling batteries during replacement.
Details the various operational modes of the inverter.
Explains the battery priority operational mode.
Details terminal functions for Backup1 and Backup2 connections.
Presents detailed technical specifications of the inverter models.
Details efficiency, safety protection, and general data of the inverter.
Provides precautions and conditions for mounting the inverter.
Details the step-by-step procedure for mounting the inverter.
Explains how to connect the PV strings to the inverter.
Details the process of connecting the inverter to the electricity grid.
Explains the EPS (Emergency Power Supply) connection for different inverter versions.
Shows wiring diagrams for E Version Auto and I Version Auto EPS connections.
Provides instructions for connecting the battery to the inverter.
Explains battery breaker requirements and BMS PIN definitions.
Explains CT connection for power monitoring and export control.
Guides on the steps to start and check the inverter after installation.
Identifies and describes the components of the inverter's control panel.
Details how to configure and use the inverter's three main operational modes.
Allows selection of working modes and configures peak shift times.
Provides a table of common faults and their solutions.
To Next Page
General
