5
The Mast and Boom
Next, locate the mast and boom section. Insert the mast into the sleeve
of the main sail. Before you completely insert the mast, slide the boom
through loop 1 and then slide O-ring 2 onto the boom. Then connect
the bottom half of the mast to the top half of the mast which is already
inside the sleeve of the sail (Fit E to E). Make sure the gooseneck on
top of the boom is pointing back and the jib hoist is pointing forward.
Now connect hook 3 to the loop on the bottom of the boom.
Find your jib sail. Attach the jib hoist, atop of the jib sail, to the jib hoist
about ¼ way down the mast (Fit F to F). Don’t be concerned, the jib sail will
hang loosely until assembly is complete.
The Mast and Sails
To Next Page
Loading...
