MEGATEK T4 - Using Your Speakers; True Wireless Stereo (TWS) Pairing

Power on
Turn on the two speakers respectively, and wait for them to
automatically enter True Wireless Stereo (TWS) pairing mode,
a tone will sound when they are paired.
USING YOUR SPEAKERS
Let’s get started.
Press and hold the buttons on the back of the
speakers for 3 seconds to turn them on. Your speakers
will power on in Bluetooth mode. A tone will sound
and the LED indicators will flash quickly whilst your
products search for Bluetooth devices.
True Wireless Stereo (TWS) Pairing
The supplied two speakers can pair each other by
TWS pairing technology for you to enjoy true wireless
stereo sound.
Power off
Press and hold the buttons for 3 seconds to turn
them off.
If the Bluetooth speakers don’t receive an audio signal
for approximately 5 minutes they will turn off. Press and
hold the button to turn the products back on again.
If the supplied two speakers are paired by TWS function,
turning off either of the speakers will turn off the other.
05
3"
ON/OFF
1.