MEGATEK T4 - Connect to a Bluetooth Device

The LED indicator on the back of the host speaker will flash
quickly whilst it searches for Bluetooth devices.
1.
On the device that you would like to connect to your
Bluetooth speaker via Bluetooth (e.g. iPhone/iPad/
Android/other phone/Tablet/Computer), turn on
Bluetooth connectivity and ensure that it is ‘discoverable’.
2.
Select to ‘Add new device’, if necessary.3.
When found, your Bluetooth speaker will be displayed as
‘Megatek T4’. Select the device name to begin pairing.
4.
When pairing is completed the blue LED indicator on the back
of the speaker will change to flash slowly.
5.
Now that you have paired your device with the Bluetooth
speaker, it will connect to it when it is within range, which is
about 10 meters or less (33 feet or less), line of sight.
6.
Your device will remain paired with the Bluetooth speaker
unless you decide to disconnect or ‘unpair’ it.
7.
Connect to a Bluetooth device
Note: Some products will automatically search for a new device
and so the ‘Add new device’ option is not available.
Note: If your device requests a password, please enter ‘0000’ to
complete the device pairing.
07