Megger DET4 Series User Manual

34
Figure 14: example two-terminal resistance reading (DET4 display shown)
Note:
 The test voltage used to make the two-terminal resistance reading is a.c. and may not be suitable for
continuity testing according to some local regulations.
 The instrument will display the warning triangle and an excessive noise voltage indicator if the ground
noise voltage is above 40 V pk-pk (14 Vrms).
 The instrument will display the warning triangle and a voltage over-range condition if the ground
noise voltage is above 100 V – no resistance reading is possible under these conditions.

Megger DET4 Series Specifications

General

Brand	Megger
Model	DET4 Series
Category	Test Equipment
Language	English